McIntosh MR87 Bedienungshandbuch PDF herunterladen (Seite 10)

How to Connect the MR87

The MR87 has the ability to be remotely switched On/

Off from a McIntosh Preamplifier or A/V Control

Center via the Power Control connection. The MR87

Data Port Connection allows for the remote opera-

tion of basic functions using the Preamplifier or A/V

Control Center Remote Control. With an appropriate

IR Sensor connected to the MR87, remote control op-

eration is possible from another room and/or when the

MR87 is located in a cabinet with the doors closed.

The connection instructions below, together with

the MR87 Connection Diagram located on the op-

posite page, is an example of a typical audio or audio/

video system. Your system may vary from this,

however the actual components would be connected in

a similar manner. For additional information refer to

“Connector and Cable Information” on pages 4 and 5.

Power Control Connections:

1. Connect a Control Cable from the Preamplifier or

A/V Control Center appropriate Jack (Tuner/Trig-

ger 4, Power Control or Trigger) to the POWER

CONTROL IN Jack on the McIntosh MR87 Tuner.

2. Optionally, connect a Control Cable from the

MR87 Tuner POWER CONTROL OUT jack to the

next McIntosh Source Component Power Control

In Jack.

Data Control Connections:

3. Connect a Control Cable from the Preamplifier or

A/V Control Center to the appropriate Data Port

Out Jack (Tuner/ 4) to the McIntosh MR87 Tuner

DATA IN Jack.

Sensor Connections:

4. Optionally, connect an appropriate IR Sensor to

the McIntosh MR87 Tuner IR IN Jack.

Digital Audio Connections:

5. Optionally, connect a Cable from the McIntosh

MR87 Tuner OPTICAL or COAXIAL to the ap-

propriate Optical or Coaxial Input (Tuner/ 9) on

the Preamplifier or A/V Control Center.

Note: Coaxial connections may be used instead of

the Optical Connections.

6. Optionally, connect a Cable from the McIntosh

MR87 Tuner remaining DIGITAL Output to the

appropriate Optical or Coaxial Input on another

Preamplifier or A/V Control Center.

Analog Audio Connections:

7. Connect Balanced Cables from the McIntosh

MR87 Tuner BALANCED OUTPUT Connec-

tors to the appropriate (Tuner/Balanced Audio In

2) Preamplifier or A/V Control Center Balanced

Input Connectors.

8. Optionally, connect an Audio Cable from the

MR87 Tuner UNBALanced OUTPUT Jacks to the

appropriate (Tuner/Stereo Audio In 4) Preampli-

fier or A/V Control Center Balanced Input Jacks.

Note: Preamplifiers require either a Balanced or

Unbalanced audio connection. A/V Control

Centers usually require unbalanced connec-

tions for proper operation of Zone B and the

record output, with Balanced connections as

optional.

AC Power Cords Connections:

9. Connect the McIntosh MR87 Tuner AC Power

Cord to a live AC outlet.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

McIntosh MR87 Bedienungshandbuch Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio-Tuner McIntosh MR87