McIntosh MR87 Bedienungshandbuch PDF herunterladen (Seite 4)

with the local regulations concerning bat-

tery disposal.

7. For additional information on the MR87

and other McIntosh Products please visit

the McIntosh Web Site at www.mcintosh-

labs.com.

Data and IR Input Port Connectors

The MR87 Data In Port receives

Remote Control Signals. A 1/8

inch stereo mini phone plug is

used for connection. The IR Port

also use a 1/8 inch stereo mini

phone plug and allow the connec-

tion of other brand IR Receivers

to the MR87.

RAA2 Connectors

Pin No. Wire Color

1. White/Orange

2. Orange

3. White/Green

4. Blue

5. White/Blue

6. Green

7. White/ Brown

8. Brown

*Cable outer shield

Note: The RAA2 Connecting Cable is available from the

McIntosh Parts Department:

RAA2 Antenna Cable Part No. 171844

Twenty foot, shielded 8 conductor, with a shielded

RJ45 connector on each end.

XLR Connectors

Below is the Pin configuration for the XLR Balanced

Output Connectors on the MR87. Refer to the dia-

grams for connections:

PIN 1: Shield/Ground

PIN 2: + Signal

PIN 3: - Signal

Power Control Connectors

The MR87 Power Control Input/Output Jacks receive/

send Power On/Off Signals when connected to other

McIntosh Components. A 1/8

inch stereo mini phone plug

is used for connection to the

Power Control Input/Output on

the MR87.

Note: The Data and Power

Control Connecting Cable is available from the

McIntosh Parts Department:

Data and Power Control Cable Part No. 170-202

Six foot, shielded 2 conductor, with 1/8 inch stereo

mini phone plugs on each end.

1. For additional connection information, refer to the

owner’s manual(s) for any component(s) connected

to the MR87 AM/FM Tuner.

2. The Main AC Power going to the MR87 and any

other McIntosh Component(s) should not be applied

until all the system components are connected

together. Failure to do so could result in malfunc-

tioning of some or all of the system’s normal opera-

tions. When the MR87 and other McIntosh Com-

ponents are in their Standby Power Off Mode, the

Microprocessor’s Circuitry inside each component

is active and communication is occurring between

them.

3. The Balanced and Unbalanced Outputs may be

used simultaneously.

4. The Remote Control Supplied with the MR87

Tuner is capable of operating other components. For

additional information go to www.mcintoshlabs.

com.

5. When discarding the unit, comply with local rules

or regulations. Batteries should never be thrown

away or incinerated but disposed of in accordance

Customer Service

If it is determined that your McIntosh product is in

need of repair, you can return it to your Dealer. You

can also return it to the McIntosh Laboratory Service

Department. For assistance on factory repair return

procedure, contact the McIntosh Service Department

at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3515

Fax: 607-723-1917

General Information

Connector and Cable Information

Power

Control

Ground

N/C

Data

Signal

N/C

Data

Ground

IR Data

Control

Ground

N/C

Pin 1

Pin 8

*Cable outer shield

PIN 1

PIN 2

PIN 3

1 2 3 4 5 6 7 8 9 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

McIntosh MR87 Bedienungshandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio-Tuner McIntosh MR87