McIntosh mc 50 Bedienungshandbuch PDF herunterladen (Seite 18)

Source Selection

Rotate the INPUT Control to select the desired source

or press the appropriate push-button on the Remote

Control. Refer to figures 50 and 53.

Volume Control

Rotate the Front Panel VOLUME Control or use the

VOLUME Upp or Downq Push-buttons on the Re-

mote Control for the desired listening level. Refer to

figures 50 and 53.

Trim Functions

The C50 has eight different Trim Selections with Ad-

justments. The Trim Selections include Balance, Trim

Level, Meter Backlight, External Processor, Equalizer

Mode, Mono/Stereo Mode, Digital Audio Display Info

Power On and Off

The Red LED above the STANDBY/ON Push-button

lights to indicate the C50 is in Standby mode. To

switch ON the C50, press the STANDBY/ON Push-

button on the Front Panel or the (Power On)

Push-button on the Remote Control. The C50 will go

through a brief startup initialization with the Front

Panel Information Display indicating the last used

source and volume setting, this is followed by the

volume setting indication starting at zero and then

increasing to the last used volume setting. Refer to

figures 50, 51, 52 and 53. To switch OFF the C50 press

the STANDBY/ON Push-button on the Front Panel or

the OFF Push-button on the Remote Control.

Note: For an explanation of the Remote Control

Push-button functions, refer to pages 10 and 11.

and Phono Cartridge Loading.

The Trim Settings are stored

in memory independently for

each Input Source Selected,

except the Meter Illumination

and Digital Audio Display set-

tings of On or Off, which are

the same for all inputs.

Note: Selection and Adjustment

of all Trim Functions

may be performed using

the Front Panel TRIM,

OUTPUT 1/ OUTPUT

2 / ◄ MENU ► Push-

buttons together with the

VOLUME/ADJUST Con-

trol. The Remote Control

TRIM Push-Button to-

gether with the LEVEL

+ / - Push-button may

also be used. Refer to

figures 50 and 53.

BALANCE

Listening balance varies with

different program sources,

room acoustics and listening

positions relative to the Loud-

speakers. Use the Balance

(Trim Function) as needed to

achieve approximately equal

listening volume levels in each

Loudspeaker. To adjust the

Balance perform the following:

1. Press the TRIM Push-button repeatedly on the

Remote Control until “BALANCE 0 dB” appears

How to Operate the C50

Figure 50

Figure 51

SOURCE: CD1

15%

Figure 52

SOURCE: SERVER

30%

Figure 53

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

McIntosh mc 50 Bedienungshandbuch Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zusätzliche Musikausrüstung McIntosh mc 50