McIntosh C500C Bedienungshandbuch PDF herunterladen (Seite 23)

Listen Processor

The C500 Preamplifier has a Listen Processor Loop for

connecting an external sound processor. The Listen Proces-

sor may be assigned to be active for only those Inputs de-

sired. To activate the Listen Proccessor Loop and assign

Inputs, perform the following steps:

Note: If the Listen Processor is set active for a given Input

and no Listen Processor is connected to the C500, no

sound will be heard when that Input is selected.

1. Press the SETUP Push-button twice to access the Setup

Preamp Mode unless the C500C is already in the Setup

Preamp Mode.

2. Rotate the MENU Control until the Alphanumeric Dis-

play indicates “LPROC NONE”. Refer to figure 40.

3. Rotate the SELECT 2 Control until the word

PRESENT appears in the Display, “LPROC

PRESENT”. Refer to figure 41.

4. Rotate the MENU Control until the Alphanumeric Dis-

play indicates “LPROC TUN - -”. Refer to figure 42.

5. Rotate the SELECT 2 Control until the word ON ap-

pears in the Display, “LPROC TUN ON”. Refer to

figure 43.

6. Rotate the SELECT 1 Control until the Title of the next

desired Input is displayed and then set the Listen Pro-

cessor to On.

7. Rotate the SELECT 2 Control until the word ON ap-

pears in right side of the Display.

8. Repeat steps 6 and 7 until all Inputs requiring the Listen

Processor have been set active.

9. If no other adjustments are to be made at this time,

press the SETUP Push-button to exit the Setup Preamp

Mode or proceed to the next desired Setup Preamp

Mode for adjustment.

Figure 40

Figure 41

Figure 42

Figure 43

The C500 Preamplifier has a Record Processor Loop for

connecting an external sound processor. The Record Proces-

sor may be assigned to be active for only those Inputs de-

sired. To activate the Record Proccessor Loop and assign

Inputs perform the following steps:

Note: If the Record Processor is set active for a given Input

and no Record Processor is connected to the C500, no

sound signal output will be available for recording

purposes when that Input is selected.

1. Press the SETUP Push-button twice to access the Setup

Preamp Mode unless the C500C is already in the Setup

Preamp Mode.

2. Rotate the MENU Control until the Alphanumeric Dis-

play indicates “RPROC NONE”. Refer to figure 45.

3. Rotate the SELECT 2 Control until the word

PRESENT appears in the Display, “RPROC

PRESENT”. Refer to figure 46.

4. Rotate the MENU Control until the Alphanumeric Dis-

play indicates “RPROC TUN - -”. Refer to figure

47.

5. Rotate the SELECT 2 Control until the word ON ap-

pears in the Display, “RPROC TUN ON”. Refer to

figure 48.

6. Rotate the SELECT 1 Control until the Title of the next

desired Input is displayed and then set the Record Pro-

cessor to On.

7. Rotate the SELECT 2 Control until the word ON ap-

pears in right side of the Display.

8. Repeat steps 6 and 7 until all Inputs requiring the

Record Processor have been set active.

9. If no other adjustments are to be made at this time,

Record Processor

Figure 45

Figure 46

Figure 47

Figure 48

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

McIntosh C500C Bedienungshandbuch Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audioverstärker McIntosh C500C