McIntosh MCC222 Bedienungshandbuch PDF herunterladen (Seite 7)

How to Connect the MCC222

McIntosh Control Center

Figure 1

Left Loudspeaker

Right Loudspeaker

How to Connect the MCC222

1. Connect the power control cable from the Control Cen-

ter Remote Amp On to the MCC222 ON connector on

the right side of the amplifier.

2. Connect cables from two separate loudspeakers to the

amplifier Left and Right terminals, being careful to ob-

serve the correct polarities.

4. Connect audio cables from the control center outputs to

the MCC222 Left and Right Inputs.

Note: All cables should be connected to the amplifier before

connecting the DC power cables to the battery.

5. Connect the MCC222 to the vehicle battery terminals

using a minimum size of 8 AWG cables.

Note: If the amplifier is mounted to an insulated mounting

surface, connect a 10 AWG wire (minimum size) from

Left Output

Right Output

Vehicle

Battery

the amplifier

chassis

directly to

the vehicle

main frame

using the

hardware

shown in

figure 1.

6. Optional Con-

nections allow

the always ac-

tive 80Hz and 120Hz Subwoofer Outputs to be con-

nected to a separate subwoofer power amplifier, re-

gardless of the MCC222 operating mode used.

Subwoofer

Loudspeaker

Optional Second Amplifier

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

McIntosh MCC222 Bedienungshandbuch Seite 7