McIntosh MA6600 Bedienungshandbuch PDF herunterladen (Seite 13)

display the Setup Mode Menu item last ac-

cessed.

3. Press the MONO/SETUP Push-button to select the

next Setup Mode Menu item, “Input Level”. With

each additional press of the MONO/SETUP Push-

button the Setup Menu will advance to the next

Menu Selection. Refer to figure 3.

4. To exit

from a

specific

Setup

Mode,

press the STORE/EXIT Push-button. The LED

above the MONO/SETUP Push-button and

STORE/EXIT Push-button will extinguish and the

Front Panel Display will revert back to its normal

display. Refer to figure 1.

Your McIntosh MA6600 has been factory configured

for default operating settings that will allow immedi-

ate enjoyment of superb audio without the need for

further adjustments. If you wish to make changes to

the factory default settings, a Setup Feature is provid-

ed to customize the operating settings using the Front

Panel Information Display. Refer to the MA6600 Front

Panel Illustration on the previous page while perform-

ing the following steps.

Note: If the MA6600 is currently On, proceed to

step 2.

1. Press the STANDBY/ON Push-button to switch

On the MA6600. The MA6600 will go through

a brief startup intialization with the Front Panel

Information Display indicating the last used

source and volume setting, this is followed by the

volume setting indication starting at zero and then

increasing to the last used volume setting. Refer to

figure 1.

2. Press the

MONO/

SETUP

Push-

button until the Front Panel Information Display

indicates MA6600 FIRMWARE V1.00 or higher.

Refer to figure 2. At this time the LEDs above the

MONO/SETUP and STORE/EXIT Push-buttons

will be illuminated.

Note: The Front Panel Information Display will

indicate MA6600 Firmware V1.00 or higher

for the first time. After the first time it will

The MA6600 functionality is controlled by internal

software that is know as Firmware. The Version of the

Firmware in the MA6600 can be identified at any time

by utilizing the Setup Mode.

1. Press and hold in the MA6600 Front Panel MONO/

SETUP Push-button to enter the Setup Mode.

2. Press the MONO/SETUP Push-button until

MA6600 V1.00 or higher appears. Refer to

figure 2.

3. The number after the character “V” is the Firm-

ware number.

4. To exit the Setup Mode, press the STORE/EXIT

Push-button.

How to Operate the Setup Modes

The Default Settings Chart below indicates the Func-

tion Name, Default Setting and the Page Number for

additional information.

Note: When a McIntosh Tuner Module is installed into

the MA6600 there will be additional Setup Set-

tings.

Default Settings

Firmware Version

Trim Level Adjustment

Source Components can have slightly different volume

levels resulting in the need to readjust the MA6600

Volume Control when switching between different

sources. The MA6600 allows the adjustment of levels

for each of the Source Inputs for the same relative

volume. The CD1 and SERVER Inputs are used in the

following example.

Note: The range of adjustment is ± 6dB. The REC Out-

put Levels are unaffected by any changes in the

Level Trim Settings. The Trim adjustments made

are retained in permanent memory. They can be

changed by performing a new Trim Procedure.

The CD1 Input Volume Level can serve as a refer-

ence or choose another source frequently listened

to. The reference Input Source should be set to a

Trim Level of 00.

1. Rotate the INPUT Control to select the CD1 Input

and adjust the VOLUME Control to the desired

listening level.

Default Settings

Function Name Setting Page No.

MA6600 V_._ _ 13

TRIM CD1 0.0 13

INPUT INPUT2 CD1 14

METER ON 14

DISPLAY 3 15

TRIGGER CD1 NONE 15

ACCessory MAIN 15

REMOTE NORM 15

Setup

Figure 3

SETUP: TRIM CD1 0.0

Min Max

Figure 2

MA6600

FIRMWARE V1.00

Figure 1

SOURCE: CD1

15%

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

McIntosh MA6600 Bedienungshandbuch Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audioverstärker McIntosh MA6600